After installation, power up the machine, the LED panel will show as "FO" which means "no water". Touch any button to pump up thw water.
There is built-in sensor to show you the real time of temperature water and if no actions in 60 seconds, the machine will turned into "locked mode" and the "LOCK" indicator will be ON. After another 60 seconds, will turn the machine from "locked mode" into "sleeping mode".
1. Safety lock: when on, heating functions will not work.
"Touch the "LOCK" panel for 1 second to ."unlock"
2. Warm mode is room temperature water.
3. Temperature: 45 / 85 / 99 degree celsius for you to choose
4. Volume: 150 / 250 / 500ml for your to choose.
5. Hot: Once you selected the volume & temperature, touch the hot button then comes out hot water.
The screen show TDS, if the TDS number equal to or greater than 300ppm, the machine will alarm and stop heating.
Flushing the filters/cleaning the reservoir tank with water, 3-5 times until it is clean, before you start drinking.